How to configure Netgear AC1900 Setup?

Netgear AC1900 Setup

An extremely fast dual-band WiFi extender with a speed of up to 1900 Mbps is the Netgear AC1900 Extender Setup. Outstanding wireless performance is provided on both bands by its 800 MHz dual-core processor. EX7000 offers top-notch wireless range from the far right to the far left of your premises in addition to having several connectivity ports. You won’t experience any interruptions when using the Netgear AC1900 Setup to stream HD material and play online games.

With any common wireless router, the Netgear AC1900-Nighthawk WiFi Mesh Extender Model:AC1900 can function. With its three potent exterior antennas, the Netgear AC1900 Setup offers whole-home connectivity. In addition, it has Fast-Lane technology, which enables simultaneous usage of both bands for seamless communication on all devices.

Netgear Nighthawk EX7000 Manual Setup | AC1900

For 802.11ac WiFi, the EX7000 employs a dual-core Broadcom BCM 4708 processor. It has a power switch, a reset button, a WPS button, five gigabit Ethernet connections, and a USB 3.0 port. Each band’s LED status indicator, LAN port, USB port, and Extender mode are all located on the front of the device. You can place your extender in any desired vertical or horizontal position with the provided mount.

You must launch the Netgear Genie web-based setup interface in order to perform the Netgear  AC1900 Setup. The specific setup instructions for the Netgear AC1900 Setup are provided below:

  • Take off the antennas’ caps, then secure them to the connectors.
  • Connect the power supply to your AC1900 EX7000 extender.
  • Enter into your browser’s address bar and hit Enter.
  • By entering this website address, the Netgear AC1900 Setup page will open.
  • Use the extender’s login information to sign in.
  • Then select New Extender Setup.
  • Adhere to the Netgear Installation Assistant’s instructions.
  • Put your extension in a new location after following the instructions.
  • In order to improve wireless connectivity, the new site must be midway between the router and the troublesome area.

Note: The WPS button can also be used to connect the extender and router.

Netgear AC1900 WPS Setup

The simplest way to set up your Netgear AC1900 with your main WiFi network is described below:

  • First, connect the AC1900 to the primary router.
  • Press and then turn the AC1900 on.
  • Continue once the extender’s green power LED light comes on.
  • On the router and the booster, press the WPS button.

WARNING: While the light is blinking, avoid unplugging or turning off your device.

  • If the Netgear AC1900 Setup and primary router are successfully connected. You can see solid green LEDs for the power, WPS, and device on the wireless extender.

How to install Netgear AC1900 WIFI extender?

To set up your Netgear AC1900 Setup follow the setup steps provided below using a web browser:

  • Connect your wireless amplifier to a power outlet.
  • A power light should eventually come on for the EX7000.
  • Use your computer or phone at this time.
  • And connect your device to the “Netgear_ext” network.
  • Once you’re connected, open a browser and enter or in the address box.
  • The Netgear Genie configuration page will then show up.
  • Follow the on-screen directions to connect your EX7000 to your home wifi network.

Netgear Nighthawk EX7000 Firmware Update

Have you noticed any problems with your extender’s operation or odd behaviour? If so, you need to update to the most recent NETGEAR-provided firmware version. After updating the Netgear AC1900 firmware on your booster, you will have access to the newest features and security patches that will help you optimise the functionality of your AC1900 and address any faults.

To update the firmware on your Netgear AC1900, follow these steps:

  • Plugging your Netgear AC1900 into a power outlet will first turn it on.
  • Put the repeater and the current router next to one another.
  • Use any web browser to find
  • Enter your username, passphrase, and SSID to log in.
  • Click on the firmware upgrade option after choosing the settings option.
  • Do not disconnect your AC1900 while the upgrade is running.

You can upgrade your Netgear AC1900’s firmware to the most recent version by following these instructions.We’ll go over how to execute a factory reset in the blog that follows.

Netgear AC1900 Reset Process

You will need to follow the Netgear AC1900 firmware upgrade procedure if you can’t remember your admin password or username and you wish to retrieve it. Your extender’s factory reset clears all personalised information, including your password, login, and SSID, and it gets it ready for a new installation process. Therefore, let’s start the reset process.

The steps to reset a Netgear AC1900 are as follows:

  •  Turn your Netgear AC1900 on.
  • On your extender, locate the reset button.
  • It is accessible through a small hole on the side of the EX7000.
  • Pull out a needle or pin with a sharp point.
  • Press the reset button for 10 seconds while using a pin.
  • Take it out ten seconds later.
  • You’ve successfully finished the factory reset procedure in this way.

You can contact us via live chat or our toll-free hotline if you need assistance with the setup updating, or reset process. You can get help from our technical professionals to solve any issues.

Related posts

Leave a Comment